Application

Surface Preparation:

Before starting to grout, remove debris in grout joints and lightly sponge the tile surface to remove dust and dirt.
Do not clean tiles with acid cleaners. In case acid cleaners were used to clean the tiles, ensure to wash the area with plenty of water before commencing grouting.

Mixing

Empty entire contents of SP-100 Stain free Grout Part “A” and Part “B” container into a clean mixing pail.
Mix with a margin trowel or a slow speed drill mixer until liquids are completely blended. Add at least ¾ of SP-100 Tile joint Part “C” Filler Powder and mix to a uniform consistency.
Add the remaining filler powder and mix to achieve a stiff mix to work into the joints.
(WE STRONGLY SUGGEST TO MIX THE NECESSARY PORTION ONLY AND USE IT WITHIN 30 MIN)
Immediately pour entire contents of bucket onto working area. Use a plastic sheet as a drop cloth. Use standard epoxy grouting techniques to work with SP-100 tile joints.
SP-100 Tile joint can also be applied with a caulking gun. Be sure all grout joints are packed full.
Remove as much excess material as possible before initial cleaning with grout float. Do not leave excess grout on the face of tiles.

Cleaning Remove excess grout from the face of the tiles with the edge of the grout float. Hold the float at a 90° angle and pull it diagonally across the joints and tile to avoid pulling out the material. Initial Cleaning: After 30-45 min of the application of the grout scrub the surface of the tile & joint with clean water and scrubber provided to remove any excess grout. Then take a clean thick white towel and drag across the tile to remove any residue. Final Cleaning: Within 24 hours do a second cleaning with normal soap detergent to remove any haze from the tile.

Areas of Application Kitchens, bathrooms, swimming pools, fountains, water bodies, hospitals,operation theaters, sterilization rooms, restaurants, cafeterias, light industrial applications and high traffic areas.

Watch Video

Substrate

Suitable for joints of 2mm - 12mm

Coverage

Please refer the Grout calculator as it depends

on the tile size, joint width and depth.

Technical Data Sheet

MYK LATICRETE SP-100 EPOXY GROUT

Application

Substrate

Coverage