product_image

MYK LATICRETE DWA 215

ADHESIVES by MYK LATICRETE

DWA 215 is a modified Polyurethane Adhesive designed for the installation of glass mosaic tile, ceramic tile, vitrified tile and natural stone on most drywall boards and clean dry cement based surfaces. DWA 215 is a factory made pail consisting of pre-blended single component adhesive which is ready to use.

Areas of Application:- For commercial and residential installations of ceramic tile, vitrified tile and natural stone over most drywall boards and clean cement based surfaces. Used where installations must resist physical abuse, shock, and mild chemicals. (Interior & Exterior

Unit

10kg & 20KG

Price / Unit

₹2712.00
Excludes GST*
Get a quote from our Authorized Dealer "ShubhTiles" (Vile Parle, Mumbai)
Get Quote

Application

Apply adhesive to the substrate with the flat side of the trowel, pressing firmly to work into surface. Comb on additional adhesive with the notched side. Use the proper sized notched trowel to insure full bedding of the tile. Spread as much adhesive as can be covered with tile in 10 minutes. Back butter large tiles (> 12”x12”) to provide full bedding and firm support. Place tiles into wet, sticky adhesive and beat in using a beating block and rubber mallet to imbed tile and adjust level. Check adhesive for complete coverage by periodically removing a tile and inspecting bedding adhesive transfer onto back of tile. If adhesive is skinned over (not sticky), remove and replace with fresh adhesive.

Watch Video

Substrate

  • Concrete
  • Cement Mortar Beds
  • Plywood
  • Gypsum wall board
  • Calcium silicate board
  • Bison panel board
  • Concrete masonry*
  • Cement plaster*
  • AAC Block masonry*
  • Cement terrazzo*
  • Cement backer board**
  • Existing ceramic tile
  • Other resilient tile and stone
  • * All cement based surfaces should have been cured as per standard practices and shall be dry for tiling
  • **Consult cement backer board manufacturer for specific installation recommendations and to verify acceptability for exterior use.
  • Note: Not for use on metal & plastic substrates and metal tiles.

Coverage

Varies in accordance with the size and type of the tile and stone installed.

Example for a Bed Thickness of 3mm it will cover 50-60sqft per 20kg pail. (Approximate)

Technical Data Sheet
company logo
About Us Privacy Policy Terms & Conditions Contact Us

© 2020 DCONSTRO Copyright