product_image

MYK LATICRETE LATAPOXY 310

ADHESIVES by MYK LATICRETE

Two component, high strength epoxy adhesive, which is formulated for the spot bonding method of tile and stone installations on vertical surfaces. LATAPOXY® 310 Stone Adhesive maintains its non-sag consistency at high temperatures up to 95°F (35°C). 

Unit

1KG

Price / Unit

₹932.00
Excludes GST*
Get a quote from our Authorized Dealer "ShubhTiles" (Vile Parle, Mumbai)
Get Quote

Application

 All surfaces must be sound, clean, free of oil, waxes, frost, curing agents, form release agents, rust or other bond inhibiting contaminants. All substrates must be clean and dry when application of LATAPOXY 310 Stone Adhesive is made.

Clean and grind back of stone at areas to receive the LATAPOXY 310 Stone Adhesive spots using a mechanical wheel grinder with a diamond wheel/blade. Remove dust with a stiff brush and wipe entire surface. Using a damp sponge (not wet), wipe the tile or stone to remove any particles or remaining dust to ensure a clean direct bond and that all ground material is removed. Wipe dry with a clean cloth, then apply LATAPOXY 310 Stone Adhesive.

MIXING:

Combine equal volumes of LATAPOXY® 310 Stone Adhesive Part A and Part B (1:1 mix). Mix until uniform in color; no swirls. Small quantities can be mixed with a putty knife or margin trowel. Larger quantities can be mixed with an electric drill mixer (low speed).

APPLICATION 

Apply dabs evenly distributed on back of the stone or tile; 5 dabs minimum, 1 in each corner and 1 in center. Cover at least 10% of the area of each piece. Finished dab thickness must be a minimum of 1/8" (3 mm), maximum of 1" (25 mm). 

12" x 12" (300 mm X 300 mm) 2" (50 mm)

24" x 24" (600 mm X 600 mm) 4" (100 mm)

36" x 36" (900 mm X 900 mm) 6" (150 mm)

Substrate

• Concrete

• Concrete masonry units (CMU)

• Brick/masonry

• Exterior glue plywood

• Cement backer board

• Steel

Coverage

The coverage for LATAPOXY® 310 Stone Adhesive will vary depending upon the amount of product required to plumb the wall. Based on 10% coverage of the area of each tile or stone piece.  

 LATAPOXY 310 Thickness 3mm diameter of 50mm will cover approximately 150-170 sq.ft.

Technical Data Sheet
company logo
About Us Privacy Policy Terms & Conditions Contact Us

© 2020 DCONSTRO Copyright