ADHESIVES by MYK LATICRETE
L307 floor and wall thin-set adhesive is a smooth and creamy thin-set Adhesive for installing small to medium format ceramic wall and floor tiles in interior areas.
Areas of Application:- Designed for interior floor & wall applications
Price / Unit
The surface to be covered with Ceramic tile shall be sound and confirm to good design, rigid, clean and free of dirt, oil, grease, curing compounds, form release agents or loose plaster and paint. For economy the surfaces should be level and true with in: Walls – 3mm in 2.5m Floors – 1.5mm in 1.0m Surface Preparation:
The products can be mixed by hand or slow speed electric drill mixer (less than 300 rpm). Pour potable clean water in a clean container and then add the powder L307 and mix until the mixture becomes creamy and plastic. Do not over mix. Leave the mix to slake for 5-10 min and remix before use. Mix only sufficient quantity of adhesive for an immediate need. Proportion:
Approximately 1 bag of L307 with 5-6 ltrs of water. Adjust the quantity of liquid to obtain proper consistency.
a) Thin Tiles upto size 300 X 300 mm (1’X1’), use a square notched trowel of size 6mm X 6mm to provide a total thickness of 3mm
b) Large Porcelain Tiles upto 450 X 450 mm with ribs, use a square notched trowel of size 6mm X 6mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 4.5mm
c) Large Porcelain Tiles upto 600 X 600 mm (2’X2’) with ribs, use a square notched trowel of size 6mm X 9mm and back butter the tiles with the same adhesive to a thickness of 1-1.5mm to provide a total thickness of 6mm
Approx. 45-50 sq.ft. per 20 kg bag with a ¼” x ¼” (6mm x 6mm) square notch trowel for a bed of 3mm.